How to Troubleshoot e3 Error in HP Deskjet 1012 Printer?
Initially look for jammed paper in your HP Deskjet 1012 printer to Solve HP E3 error . For that press the power button to turn on the printer. Then open the exterior door of your HP printer. You have to lightly press the ink cartridges to release it from the slots.
Then check the cartridge for any problem and gently insert them in the slot. After that close the ink cartridge access door. Now turn on the printer by plugging the power cord directly to the printer to Solve HP E3 error.
What is E3 error in HP DeskJet 1012 Printer?
E3 error in HP Deskjet 1012 printer is meant by carriage jam which might be the indication of paper jam error. Finally, you can identify the error with blinking error light, paper error light, ink alert light and Resume light.
To do this you can use the flash light to find and remove the jammed paper. Then, you have to check for the jammed paper in the input tray, output tray and in the ink carriage. Then, if you find any paper, carefully remove them and press the cancel button. The printer now automatically tries to Solve HP E3 error.
First , you have to remove the jammed paper from the output tray and make sure the cartridge can move freely. Finally, remove any loosed or jammed paper from the output tray.
Confirm that Your Carriage Moves Freely
Open the ink cartridge access door. Wait for the carriage to come to rest. Then inspect the area for any jammed paper. If you find any remove them with both the hands to avoid further tearing. Then try pushing the cartridge to the left and right. Finally , see for any damaged paper and remove them.
Check the Ink Cartridges
First turn on the printer and open the ink cartridge access door. You have to wait for the cartridge to come to rest. And remove the cartridges from the ink slot. Then, hold the cartridges by its side. And again insert them properly in its slot in an upward direction. Finally, close the ink cartridge access door and see if it Solve HP E3 error..
You have to remove the power cord from the HP printer. Then, remove them from the power strips if it is connected. Next plug the power cord directly into the wall outlet. Then reconnect the printer directly to the wall outlet. Then turn on the HP Deskjet 1000 printer and try printing. If again the error persists give the printer for service to Solve HP E3 error.
What To Do When E3 error is Showing But No Paper loaded in the Printer?
When you go through E3 error and have no paper loaded in your HP printer then we have to find where the issue arises from. Follow the below steps to Solve HP E3 error.
- First, directly remove the power cord and wait for few minutes before restarting the printer.
- Sometimes there may be something which can prevent the paper path and causing the error.
- Then, try to removing the cartridges and reinsert them carefully with matching colors.
- Move the cartridge right to left and make sure it moves freely.
- And load minimum number of paper in the input tray.
- Next check your paper path is not crowded with any obstacles.
- This steps wont clear your error then service your printer to Solve HP E3 error.